There are many parts to pool tables. The table's top is multi-layered and covered with billiard fabric. Some people prefer different colors of cloth to be on their pool tables. This allows you to create a personalized experience. It also ensures that there is no uneven playing surface.
The slate is the primary part of a pool-table. Slate is a heavy, milled stone that is used for the table's surface. Most pools tables are made of either 1" or 3/4" slate. The correct size is important if you are looking to buy a new pool table.
The rails are an important part of the pool table. Rails can either be made of synthetic materials or natural ging. They help provide support to the table and are glued to the slate. The rail may be made of solid wood in some cases. Other materials are usually plywood or fiberboard.
Cushions are used as protection for the rails and to keep them from being damaged. Cushions are made of vulcanized rubber or cloth. These cushions can be interchangeable with rails.
The top rail is a shorter rail that is attached to the top of the table. Side rails, which are shorter, extend along the length the pool table. Cross beams are added to increase strength. A transitionplate is installed between rails and slate. A transition plate is used to strengthen the table.
The foot of the table is the location for the bottom rail. Rail apron, a horizontal timber used to support the rails, is located at the foot of your table. Bed shelf is another support. These are both made of solid wood. Post legs can be considered perfect legs.
Corner pockets are holes at the corners of a table. The angle at which corner pocket doors open is 142deg (+/-1deg). The corner pocket opening is from 4 7/8 inches to 5 1/8 inch maximum.
The head string is a line running horizontally across the center of the table. The head string's starting point is usually the second diamond in the side pockets. A player can however draw a line on the cloth marking the beginning of the head string.
The foot spot is at the end the table. The foot spot is where the ball will land if a shooter takes the ball away from the table. It is also the location of the nameplate.
You should check the thickness of your slate before you buy a new pool table. The slate should have a thickness of 1". Many dealers sell tables that have 7/8" slate. They will be less expensive, but you won't get the exact same results as a 1 inch slate.
Another important component of your pool table is the cloth. Modern billiard cloth is usually made of a blend of natural wool and synthetic nylon. Billiard felt is another component of the cloth. Some players prefer a certain color of cloth. However, it should still be durable and smooth. To maintain the cloth's quality, you should brush it at least once per month.